Switches

	__ __
Description	Description - __
Rating	Rating - __
Vendor	Vendor - __
Color	Color - __
	View full details

huawei

(0)

LE 2,961.00

Item	Value
Basic Information
Module name	OMXD30000
Part Number	02318169
Model	OMXD30000
Form factor	SFP+
Application standard	10GBASE-SR
Connector type	LC
Optical fiber type	MMF
Working case temperature [°C(°F)]	0°C to 70°C (32°F to 158°F)
Digital diagnostic monitoring (DDM)	Supported
Transmission rate [bit/s]	10 Gbit/s
Target transmission distance [km]	Multimode fiber (with modal bandwidth of 160 MHzkm and diameter of 62.5 μm): 0.026 km Multimode fiber (OM1): 0.033 km Multimode fiber (with modal bandwidth of 400 MHzkm and diameter of 50 μm): 0.066 km Multimode fiber (OM2): 0.082 km Multimode fiber (OM3): 0.3 km Multimode fiber (OM4): 0.4 km
Transmitter Optical Characteristics
Center wavelength [nm]	850 nm
Maximum Tx optical power [dBm]	-1.0 dBm
Minimum Tx optical power [dBm]	-7.3 dBm
Minimum extinction ratio [dB]	3.0 dB
Receiver Optical Characteristics
Rx sensitivity [dBm]	-11.1 dBm
Overload power [dBm]	-1.0 dBm

In stock

huawei

Huawei Switch S220-48T4X (48*GE ports, 4*10GE SFP+ ports, built-in AC power)

(0)

LE 21,450.00

S220-48T4X , a high-capacity network switch designed to accommodate the ever-growing demand for reliable and high-speed network connectivity. The S220-48T4X model is crafted to provide an exceptional networking foundation for enterprises seeking to enhance their operational efficiency and network performance.

Equipped with 48 Gigabit Ethernet ports, the Huawei S220-48T4X offers ample connectivity for a myriad of devices, making it an ideal choice for businesses with extensive networking requirements. These ports deliver fast and reliable data transfer, ensuring that all connected devices benefit from optimal performance.

In addition to its impressive array of Gigabit ports, the S220-48T4X boasts 4 10G SFP+ ports. These high-speed uplink ports are perfect for businesses that require fast data transfer rates for applications such as streaming, large file transfers, or data backups, providing a future-proof solution that supports the increasing demands for bandwidth.

The Huawei S220-48T4X is not just about sheer speed; it’s also about intelligent network management. With advanced Quality of Service (QoS) capabilities and Link Aggregation Control Protocol (LACP), it ensures that critical network traffic is prioritized and that data flows smoothly and efficiently across the network.

One of the key benefits of the Huawei S220-48T4X is its ease of integration into existing network infrastructures. Its intuitive management interface simplifies the complexities of network configuration, monitoring, and troubleshooting, allowing for seamless network administration and operation.

Durability and reliability are the cornerstones of the S220-48T4X’s design. It is engineered to endure the continuous operation demands of modern businesses, and its energy-efficient technologies help reduce operational costs while maintaining high performance.

Embrace the Huawei S220-48T4X for an advanced, scalable network solution that promises to keep pace with your company’s growth. This switch is not just a tool for today but an investment in your network’s future, designed to provide a stable and robust networking experience. Engage with us to discover the full potential of the Huawei S220-48T4X and how it can become the backbone of your business’s connectivity needs.

Overview

Table 4-36 Basic information about the S220-48T4X

Item	Details
Description	S220-48T4X (4810/100/1000BASE-T ports, 410GE SFP+ ports, built-in AC power)
Part Number	98012377
Model	S220-48T4X
First supported version	V600R023C00

Components

Figure 4-13 S220-48T4X appearance

1	Forty-eight 10/100/1000BASE-T ports	2	Four 10GE SFP+ ports
3	One console port	4	One MODE button NOTE: This button is reserved and is not required currently.
5	One RST button NOTICE: To restore the factory settings and reset the device, hold down the button for at least 6 seconds. To reset the device, press the button. Resetting the device will cause service interruption. Exercise caution when you press the button.	6	Ground screw NOTE: It is used with a ground cable.
7	Jack for AC power cable locking strap NOTE: The AC power cable locking strap is not delivered with the switch.	8	AC socket NOTE: It is used with an AC power cable.

Ports

Table 4-37 Ports on the S220-48T4X

Port	Connector Type	Description	Available Components
10/100/1000BASE-T port	RJ45	A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s.	Ethernet cable
10GE SFP+ port	SFP+	A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s or 10 Gbit/s.	GE eSFP optical modules GE-CWDM eSFP optical modules GE-DWDM eSFP optical modules GE SFP copper module 10GE SFP+ optical modules 10GE-CWDM SFP+ optical modules 10GE-DWDM SFP+ optical modules 1 m and 3 m SFP+ high-speed copper cables 10 m SFP+ AOC cables
Console port	RJ45	The console port is connected to a console for on-site configuration.	Console cable

Indicators and Buttons

The S220-48T4X has similar indicators to those on the S220-48P4X except that the S220-48T4X does not have a PoE mode indicator. For details, see the S220-48P4X.

Power Supply System

The switch has a built-in AC power module and does not support pluggable power modules.

Heat Dissipation System

The switch has a built-in fan for forced air cooling. Air flows in from the left side, and exhausts from the right side.

When working properly at a normal temperature, the device meets the desktop-class noise requirements. However, the fan speed may be high and the noise may be loud during device startup.

In stock

huawei

Huawei Switch S220-48T4S (48*GE ports, 4*GE SFP ports, built-in AC power)

(0)

LE 18,500.00

S220-48T4S

Overview

Table 4-33 Basic information about the S220-48T4S

Item	Details
Description	S220-48T4S (4810/100/1000BASE-T ports, 4GE SFP ports, built-in AC power)
Part Number	98012380
Model	S220-48T4S
First supported version	V600R023C00

Components

Figure 4-12 S220-48T4S appearance

1	Forty-eight 10/100/1000BASE-T ports	2	Four 1000BASE-X ports
3	One console port	4	One MODE button NOTE: This button is reserved and is not required currently.
5	One RST button NOTICE: To restore the factory settings and reset the device, hold down the button for at least 6 seconds. To reset the device, press the button. Resetting the device will cause service interruption. Exercise caution when you press the button.	6	Ground screw NOTE: It is used with a ground cable.
7	Jack for AC power cable locking strap NOTE: The AC power cable locking strap is not delivered with the switch.	8	AC socket NOTE: It is used with an AC power cable.

Ports

Table 4-34 Ports on the S220-48T4S

Port	Connector Type	Description	Available Components
10/100/1000BASE-T port	RJ45	A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s.	Ethernet cable
1000BASE-X port	SFP	A 1000BASE-X port can send and receive data at 1000 Mbit/s.	GE eSFP optical modules GE-CWDM eSFP optical modules GE-DWDM eSFP optical modules GE SFP copper module
Console port	RJ45	The console port is connected to a console for on-site configuration.	Console cable

Indicators and Buttons

The S220-48T4S has similar indicators to those on the S220-48P4X except that the S220-48T4S does not have a PoE mode indicator. For details, see the S220-48P4X.

Power Supply System

The switch has a built-in AC power module and does not support pluggable power modules.

Heat Dissipation System

The switch has a built-in fan for forced air cooling. Air flows in from the left side, and exhausts from the right side.

When working properly at a normal temperature, the device meets the desktop-class noise requirements. However, the fan speed may be high and the noise may be loud during device startup.

In stock

huawei

Huawei Switch S220-48P4X 48*GE ports(380W PoE+), 4*10GE SFP+ ports, built-in AC power)

(0)

LE 37,800.00

S220-48P4X

Overview

Table 4-42 Basic information about the S220-48P4X

Item	Details
Description	S220-48P4X (4810/100/1000BASE-T ports(380W PoE+), 410GE SFP+ ports, built-in AC power)
Part Number	98012378
Model	S220-48P4X
First supported version	V600R023C00

Components

Figure 4-15 S220-48P4X appearance

1	Forty-eight 10/100/1000BASE-T PoE+ ports	2	Four 10GE SFP+ ports
3	One console port	4	One MODE button
5	One RST button To reset the device, press the button. Resetting the device will cause service interruption.	6	Ground screw NOTE: It is used with a ground cable.
7	Jack for AC power cable locking strap NOTE: The AC power cable locking strap is not delivered with the switch.	8	AC socket NOTE: It is used with an AC power cable.

Ports

Table 4-43 Ports on the S220-48P4X

Port	Connector Type	Description	Available Components
10/100/1000BASE-T port	RJ45	A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s.	Ethernet cable
10GE SFP+ port	SFP+	A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s or 10 Gbit/s.	GE eSFP optical modules GE-CWDM eSFP optical modules GE-DWDM eSFP optical modules GE SFP copper module 10GE SFP+ optical modules 10GE-CWDM SFP+ optical modules 10GE-DWDM SFP+ optical modules 1 m and 3 m SFP+ high-speed copper cables 10 m SFP+ AOC cables
Console port	RJ45	The console port is connected to a console for on-site configuration.	Console cable

Indicators and Buttons

Figure 4-16 Indicators on the Switch

Table 4-44 Description of indicators on the switch

No.	Indicator	Name	Color	Status	Description
1	PWR	Power module indicator	–	Off	The switch is powered off.
1	PWR	Power module indicator	Green	Steady on	The power supply is normal.
2	SYS	System status indicator	–	Off	The system is not running.
			Green	Fast blinking	The system is starting.
			Green	Steady on	During the system startup preparation phase, the SYS indicator is steady green, which lasts for a maximum of 30 seconds.
			Green	Slow blinking	The system is running normally.
			Red	Steady on	The system does not work normally after registration, or a fan alarm or a temperature alarm has been generated.
3	PoE	PoE indicator	–	Off	The PoE mode is not selected.
3	PoE	PoE indicator	Green	Steady on	The PoE mode is selected, and service port indicators show the PoE status of each port.
4	MODE	Mode switch button	–	–	If you do not press the MODE button within 45 seconds, the service port indicators restore to the default mode.
5	–	Electrical service port indicator (one indicator for each port)	Arrowheads show the positions of ports. A down arrowhead indicates a port at the bottom, and an up arrowhead indicates a port at the top.		Meanings of service port indicators vary in different modes. For details, see Table 4-45 and Table 4-46.
6	–	Optical service port indicator (two indicators for each port)	Each optical port has two single-color indicators. The one on the left is the ACT indicator (yellow), and the one on the right is the LINK indicator (green). Arrowheads show the positions of ports. A down arrowhead indicates a port at the bottom, and an up arrowhead indicates a port at the top.
7	CLOUD	Cloud indicator	–	Off	The device is not in the cloud management state.
			Blue	Fast blinking	The device is connecting to the cloud.
			Blue	Slow blinking	The device is in the cloud management state.

Table 4-45 Description of service port indicators in different modes (one indicator for each port)

Display Mode	Color	Status	Description
Default mode	–	Off	The port is not connected or has been shut down.
	Green	Steady on	A link has been established on the port.
	Green	Blinking	The port is sending or receiving data.
PoE mode	–	Off	The port is not providing power to a powered device (PD).
	Green	Steady on	The port is providing power to a PD.
	Green	Blinking	The power of the PD connected to the port exceeds the power capacity of the port or the power threshold configured on the port. Alternatively, the PD does not comply with IEEE standards.

Table 4-46 Description of service port indicators in different modes (two indicators for each port)

Display Mode	Color	Status	Description
Default mode (LINK indicator)	–	Off	The port is not connected or has been shut down.
Default mode (LINK indicator)	Green	Steady on	A link has been established on the port.
Default mode (ACT indicator)	–	Off	The port is not connected or has been shut down, or no data is transmitted or received.
Default mode (ACT indicator)	Yellow	Blinking	The port is sending or receiving data.

Power Supply System

The switch has a built-in AC power module and does not support pluggable power modules. The built-in power module can provide 380 W PoE power, which ensures full PoE power on 24 ports in compliance with 802.3af or on 12 ports in compliance with 802.3at.

Heat Dissipation System

The switch has two built-in fans for forced air cooling. Air flows in from the left side, and exhausts from the right side.

This figure only shows the airflow direction and does not depict the actual device.

Technical Specifications

Table 4-47 Technical specifications of the S220-48P4X

Item	Specification
Dimensions without packaging (H x W x D) [mm(in.)]	Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 220.0 mm (1.72 in. x 17.4 in. x 8.66 in.) Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 227.0 mm (1.72 in. x 17.4 in. x 8.94 in.)
Dimensions with packaging (H x W x D) [mm(in.)]	90.0 mm x 550.0 mm x 360.0 mm (3.54 in. x 21.65 in. x 14.17 in.)
Chassis height [U]	1 U
Chassis material	Metal
Weight without packaging [kg(lb)]	3.24 kg (7.14 lb)
Weight with packaging [kg(lb)]	4.29 kg (9.46 lb)
Typical power consumption [W]	49.44 W
Typical heat dissipation [BTU/hour]	168.69 BTU/hour
Maximum power consumption [W]	Without PoE: 64.7 W Full PoE load: 462.80 W (PoE: 380 W)
Maximum heat dissipation [BTU/hour]	Without PoE: 220.76 Full PoE load: 1579.12
Static power consumption [W]	34.04 W
MTBF [years]	48.14 years
MTTR [hours]	2 hours
Availability	> 0.99999
Noise at normal temperature (acoustic power) [dB(A)]	49.3 dB(A)
Noise at normal temperature (acoustic pressure) [dB(A)]	37.3 dB(A)
Number of card slots	0
Number of power slots	0
Number of fans modules	2
Uplink ports	4 x 10GE SFP+ ports
Downlink ports	48 x 10/100/1000BASE-T ports (380 W, PoE+)
Redundant power supply	Not supported
Long-term operating temperature [°C(°F)]	-5°C to +50°C (23°F to 122°F) at an altitude of 0-1800 m (0-5905.44 ft.)

Storage temperature [°C(°F)]	–40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH]	5% RH to 95% RH (non-condensing)
Long-term operating altitude [m(ft.)]	0–5000 m (0–16404 ft.)
Storage altitude [m(ft.)]	0-5000 m (0-16404 ft.)
Power supply mode	AC built-in
Rated input voltage [V]	AC input: 100 V AC to 240 V AC, 50/60 Hz High-voltage DC input: 240 V DC
Input voltage range [V]	AC input: 90 V AC to 290 V AC; 45 Hz to 65 Hz High-voltage DC input: 190 V DC to 290 V DC
Maximum input current [A]	6 A
Memory	2 GB
Flash memory	Physical space: 1 GB
Console port	RJ45
Eth Management port	Not supported
USB	Not supported
RTC	Not supported
RPS input	Not supported
Service port surge protection [kV]	Common mode: ±7 kV
Power supply surge protection [kV]	Differential mode: ±6 kV; common mode: ±6 kV
Ingress protection level (dustproof/waterproof)	IP20
Types of fans	Built-in

In stock

huawei

Huawei S110-24LP2SR eKitEngine Unmanaged PoE+ Switch, 24 Port Gigabit Ethernet + 2 SFP ports

(0)

LE 10,450.00

Overview

Table 4-21 Basic information about the S110-24LP2SR

Item	Details
Description	S110-24LP2SR (2410/100/1000BASE-T ports, 2GE SFP ports, PoE+, AC power)
Part Number	98012198
Model	S110-24LP2SR

Components

Figure 4-8 S110-24LP2SR appearance

1	PWR indicator	2	Twenty-four GE PoE+ electrical ports
3	Electrical port indicator	4	Two GE optical ports
5	Optical port indicator	6	Port mode switch button NOTE: Standard Mode: All ports are in the same VLAN, and the flow control function is enabled. Port Isolation: All downlink ports are isolated from each other and cannot communicate with each other. Downlink ports can communicate only with uplink ports. (The last two downlink electrical ports are not isolated.) Uplink ports are not isolated or aggregated. Uplink Aggregation: Two uplink optical ports are aggregated into a trunk interface. Eth-Trunk supports load balancing only based on source physical ports. Flow Control Disabling: All ports are in the same VLAN and flow control is disabled.
7	Port indicator status switch button NOTE: Port status: The port indicator indicates the data transmission status of the port. PoE status: The port indicator indicates the PoE status of the port.	8	Ground screw
9	AC socket NOTE: Use the power cable delivered with the device.	–	–

Ports

Table 4-22 Ports on the S110-24LP2SR

Port	Connector Type	Description	Available Components
GE PoE+ electrical port	RJ45	A GE PoE+ electrical port sends and receives service data at 10/100/1000 Mbit/s. The port supports the PoE function.	Ethernet cable
GE optical port	SFP	A GE optical port can send and receive data at 100/1000 Mbit/s.	FE SFP/eSFP optical modules (only optical modules with transmission distances less than or equal to 15 km are supported) GE eSFP optical modules (only optical modules with transmission distances less than or equal to 10 km are supported)

Port

Connector Type

Description

Available Components

GE PoE+ electrical port

RJ45

A GE PoE+ electrical port sends and receives service data at 10/100/1000 Mbit/s.

The port supports the PoE function.

Ethernet cable

GE optical port

SFP

A GE optical port can send and receive data at 100/1000 Mbit/s.

FE SFP/eSFP optical modules (only optical modules with transmission distances less than or equal to 15 km are supported)
GE eSFP optical modules (only optical modules with transmission distances less than or equal to 10 km are supported)

Indicators and Buttons

Table 4-23 Description of indicators on the device

Indicator	Color	Status	Description
PWR indicator	–	Off	The device is powered off.
PWR indicator	Green	Steady on	The power supply is normal.
Port indicator (Port status)	–	Off	The port is not connected or has been shut down.
	Green	Steady on	A link has been established on the port. NOTE: During device startup, all port indicators are steady green for about 2 seconds and then off, indicating that service initialization is complete.
	Green	Blinking	The port is sending or receiving data.
Port indicator (PoE status)	–	Off	The port is not supplying PoE power.
	Green	Steady on	The port is supplying power to the connected PD.
	Green	Blinking	The PoE power of the device is insufficient, and the port cannot provide power to the PD.

Power Supply System

The device uses the power adapter delivered with the device to supply power to the device and the connected PD. The power adapter can provide 124 W PoE power, which ensures full PoE power on 8 ports in compliance with 802.3af or on 4 ports in compliance with 802.3at.

Heat Dissipation System

The device has no fans and uses natural heat dissipation.

Low in stock

huawei

Huawei S110-8T2ST eKitEngine Unmanaged Switch

(0)

LE 3,499.00

S110-8T2ST

S110-8T2ST Overview

Basic information about the S110-8T2ST

Item	Details
Description	S110-8T2ST (810/100/1000BASE-T ports, 1GE SFP port, 110/100/1000BASE-T port, with 1AC power adapter, fanless)
Part Number	98012199
Model	S110-8T2ST

Components

appearance

S110-8T2ST

1

PWR indicator

2

Port indicator

3

Eight GE electrical ports

4

One GE electrical port and one GE optical port

5

Port mode switch button

NOTE:

Standard Mode: All ports are in the same VLAN, and the flow control function is enabled.

Port Isolation: All downlink ports are isolated from each other and cannot communicate with each other. Downlink ports can communicate only with uplink ports. Uplink ports are not isolated or aggregated.

Flow Control Disabling: All ports are in the same VLAN and flow control is disabled.

6

Power adapter socket

NOTE:

Use the power adapter (12 V 1 A) delivered with the device.

S110-8T2ST Ports

Table 4-5 Ports on the S110-8T2ST

Port	Connector Type	Description	Available Components
GE electrical port	RJ45	A GE electrical port sends and receives service data at 10/100/1000 Mbit/s.	Ethernet cable
GE optical port	SFP	A GE optical port can send and receive data at 100/1000 Mbit/s.	FE SFP/eSFP optical modules (only optical modules with transmission distances less than or equal to 15 km are supported) GE eSFP optical modules (only optical modules with transmission distances less than or equal to 10 km are supported)

Indicators and Buttons

Description of indicators on the device

Indicator	Color	Status	Description
PWR indicator	–	Off	The device is powered off.
PWR indicator	Green	Steady on	The power supply is normal.
Port indicator	–	Off	The port is not connected or has been shut down.
	Green	Steady on	A link has been established on the port. NOTE: During device startup, all port indicators are steady green for about 2 seconds and then off, indicating that service initialization is complete.
	Green	Blinking	The port is sending or receiving data.

Power Supply System

The device is powered by the power adapter delivered with the device.

Heat Dissipation System

The device has no fans and uses natural heat dissipation.

S110-8T2ST Technical Specifications

Technical specifications of the S110-8T2ST

Item	Specification
Dimensions without packaging (H x W x D) [mm(in.)]	Basic dimensions (excluding the parts protruding from the body): 35 mm x 210.0 mm x 130.0 mm (1.38 in. x 8.27 in. x 5.12 in.) Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 36.5 mm x 210.0 mm x 131.7 mm (1.44 in. x 8.27 in. x 5.19 in.)
Dimensions with packaging (H x W x D) [mm(in.)]	90.0 mm x 285.0 mm x 180.0 mm (3.54 in. x 11.22 in. x 7.09 in.)
Chassis height [U]	0.8 U
Chassis material	PC+ABS
Weight without packaging [kg(lb)]	0.46 kg (1.01 lb)
Weight with packaging [kg(lb)]	0.70 kg (1.54 lb)
Typical power consumption [W]	8 W
Typical heat dissipation [BTU/hour]	27.30 BTU/hour
Maximum power consumption [W]	8.4 W
Maximum heat dissipation [BTU/hour]	28.66 BTU/hour
Static power consumption	2
MTBF [years]	86.16 years
MTTR [hours]	2 hours
Availability	> 0.99999
Noise at normal temperature (acoustic power) [dB(A)]	Noise-free (no fans), < 30
Noise at normal temperature (acoustic pressure) [dB(A)]	Noise-free (no fans), < 20
Number of card slots	0
Number of power slots	0
Number of fans modules	0
Switching capacity	To obtain data of this specification item, see the corresponding datasheet or contact the product sales personnel.
Packet forwarding rate	To obtain data of this specification item, see the corresponding datasheet or contact the product sales personnel.
Working mode	Standard mode Port isolation Flow control disabling
MAC address entry	2K
Redundant power supply	Not supported
Long-term operating temperature [°C(°F)]	0°C to 40°C (32°F to 104°F) at an altitude of 0-1800 m (0-5906 ft.)
Restriction on the operating temperature variation rate [°C(°F)]	When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).
Storage temperature [°C(°F)]	–40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH]	5% RH to 95% RH (non-condensing)
Long-term operating altitude [m(ft.)]	0–5000 m (0–16404 ft.)
Storage altitude [m(ft.)]	0-5000 m (0-16404 ft.)
Power supply mode	Power adapter
Rated input voltage [V]	Power adapter input: 100–240 V AC; 50/60 Hz Power adapter output: 12 V DC
Input voltage range [V]	Power adapter input: 90 V AC to 264 V AC; 47 Hz to 63 Hz
Maximum input current [A]	1 A
Memory	–
Flash memory	–
Console port	Not supported
Eth Management port	Not supported
USB	Not supported
RTC	Not supported
RPS input	Not supported
Service port surge protection [kV]	Common mode: ±4 kV
Power supply surge protection [kV]	±2 kV in differential mode, ±4 kV in common mode
Ingress protection level (dustproof/waterproof)	IP20
Types of fans	None
Heat dissipation mode	Natural heat dissipation
Airflow direction	–
PoE	Not supported
Certification	EMC certification Safety certification Manufacturing certification

Low in stock

huawei

Huawei Switch S110-24T2SR (24*GE ports, 2*GE SFP ports, AC power)

(0)

LE 9,900.00

S110-24T2SR appearance

1	PWR indicator	2	Twenty-four GE electrical ports
3	Electrical port indicator	4	Two GE optical ports
5	Optical port indicator	6	Port mode switch button NOTE: Standard Mode: All ports are in the same VLAN, and the flow control function is enabled. Port Isolation: All downlink ports are isolated from each other and cannot communicate with each other. Downlink ports can communicate only with uplink ports. (The last two downlink electrical ports are not isolated.) Uplink ports are not isolated or aggregated. Uplink Aggregation: Two uplink optical ports are aggregated into a trunk interface. Eth-Trunk supports load balancing only based on source physical ports. Flow Control Disabling: All ports are in the same VLAN and flow control is disabled.
7	Ground screw	8	AC socket NOTE: Use the power cable delivered with the device.

Ports

Ports on the S110-24T2SR

Port	Connector Type	Description	Available Components
GE PoE+ electrical port	RJ45	A GE PoE+ electrical port sends and receives service data at 10/100/1000 Mbit/s.	Ethernet cable
GE optical port	SFP	A GE optical port can send and receive data at 100/1000 Mbit/s.	FE SFP/eSFP optical modules (only optical modules with transmission distances less than or equal to 15 km are supported) GE eSFP optical modules (only optical modules with transmission distances less than or equal to 10 km are supported)

Indicators and Buttons

Description of indicators on the device

Indicator	Color	Status	Description
PWR indicator	–	Off	The device is powered off.
PWR indicator	Green	Steady on	The power supply is normal.
Port indicator	–	Off	The port is not connected or has been shut down.
	Green	Steady on	A link has been established on the port. NOTE: During device startup, all port indicators are steady green for about 2 seconds and then off, indicating that service initialization is complete.
	Green	Blinking	The port is sending or receiving data.

Power Supply System

The device is powered by the power cable delivered with the device.

Heat Dissipation System

The device has no fans and uses natural heat dissipation.

Technical Specifications

Technical specifications of the S110-24T2SR

In stock

huawei

Huawei Switch S110-16LP2SR (16*GE ports(124W PoE+), 2*GE SFP ports, AC power)

(0)

LE 11,400.00

Overview

Table 4-13 Basic information about the S110-16LP2SR

Item	Details
Description	S110-16LP2SR (1610/100/1000BASE-T ports, 2GE SFP ports, PoE+, AC power)
Part Number	98012197
Model	S110-16LP2SR

Components

Figure 4-6 S110-16LP2SR appearance

1	PWR indicator	2	Sixteen GE PoE+ electrical ports
3	Electrical port indicator	4	Two GE optical ports
5	Optical port indicator	6	Port mode switch button NOTE: Standard Mode: All ports are in the same VLAN, and the flow control function is enabled. Port Isolation: All downlink ports are isolated from each other and cannot communicate with each other. Downlink ports can communicate only with uplink ports. (The last two downlink electrical ports are not isolated.) Uplink ports are not isolated or aggregated. Uplink Aggregation: Two uplink optical ports are aggregated into a trunk interface. Eth-Trunk supports load balancing only based on source physical ports. Flow Control Disabling: All ports are in the same VLAN and flow control is disabled.
7	Port indicator status switch button NOTE: Port status: The port indicator indicates the data transmission status of the port. PoE status: The port indicator indicates the PoE status of the port.	8	Ground screw
9	AC socket NOTE: Use the power cable delivered with the device.	–	–

Ports

Table 4-14 Ports on the S110-16LP2SR

Port	Connector Type	Description	Available Components
GE PoE+ electrical port	RJ45	A GE PoE+ electrical port sends and receives service data at 10/100/1000 Mbit/s. The port supports the PoE function.	Ethernet cable
GE optical port	SFP	A GE optical port can send and receive data at 100/1000 Mbit/s.	FE SFP/eSFP optical modules (only optical modules with transmission distances less than or equal to 15 km are supported) GE eSFP optical modules (only optical modules with transmission distances less than or equal to 10 km are supported)

Port

Connector Type

Description

Available Components

GE PoE+ electrical port

RJ45

A GE PoE+ electrical port sends and receives service data at 10/100/1000 Mbit/s.

The port supports the PoE function.

Ethernet cable

GE optical port

SFP

A GE optical port can send and receive data at 100/1000 Mbit/s.

Indicators and Buttons

Table 4-15 Description of indicators on the device

Indicator	Color	Status	Description
PWR indicator	–	Off	The device is powered off.
PWR indicator	Green	Steady on	The power supply is normal.
Port indicator (Port status)	–	Off	The port is not connected or has been shut down.
	Green	Steady on	A link has been established on the port. NOTE: During device startup, all port indicators are steady green for about 2 seconds and then off, indicating that service initialization is complete.
	Green	Blinking	The port is sending or receiving data.
Port indicator (PoE status)	–	Off	The port is not supplying PoE power.
	Green	Steady on	The port is supplying power to the connected PD.
	Green	Blinking	The PoE power of the device is insufficient, and the port cannot provide power to the PD.

Low in stock

huawei

Huawei S220S-8T2J Layer 2 Switch, 8 Port Gigabit, 2 x 10GE SFP+ ports

(0)

LE 5,430.00

Table 4-3 Basic information about the S220S-8T2J

Item	Details
Description	S220S-8T2J (810/100/1000BASE-T ports, 22.5GE SFP ports, built-in AC power, Fanless)
Part Number	98012453
Model	S220S-8T2J
First supported version	V600R024C00

In stock

Product Comparison

Collection description

Explore Related Collections

Collection description