Network

	__ __
Description	Description - __
Rating	Rating - __
Vendor	Vendor - __
Color	Color - __
	View full details

huawei

Huawei S110-8T2ST eKitEngine Unmanaged Switch

(0)

LE 3,499.00

S110-8T2ST

S110-8T2ST Overview

Basic information about the S110-8T2ST

Item	Details
Description	S110-8T2ST (810/100/1000BASE-T ports, 1GE SFP port, 110/100/1000BASE-T port, with 1AC power adapter, fanless)
Part Number	98012199
Model	S110-8T2ST

Components

appearance

S110-8T2ST

1

PWR indicator

2

Port indicator

3

Eight GE electrical ports

4

One GE electrical port and one GE optical port

5

Port mode switch button

NOTE:

Standard Mode: All ports are in the same VLAN, and the flow control function is enabled.

Port Isolation: All downlink ports are isolated from each other and cannot communicate with each other. Downlink ports can communicate only with uplink ports. Uplink ports are not isolated or aggregated.

Flow Control Disabling: All ports are in the same VLAN and flow control is disabled.

6

Power adapter socket

NOTE:

Use the power adapter (12 V 1 A) delivered with the device.

S110-8T2ST Ports

Table 4-5 Ports on the S110-8T2ST

Port	Connector Type	Description	Available Components
GE electrical port	RJ45	A GE electrical port sends and receives service data at 10/100/1000 Mbit/s.	Ethernet cable
GE optical port	SFP	A GE optical port can send and receive data at 100/1000 Mbit/s.	FE SFP/eSFP optical modules (only optical modules with transmission distances less than or equal to 15 km are supported) GE eSFP optical modules (only optical modules with transmission distances less than or equal to 10 km are supported)

Indicators and Buttons

Description of indicators on the device

Indicator	Color	Status	Description
PWR indicator	–	Off	The device is powered off.
PWR indicator	Green	Steady on	The power supply is normal.
Port indicator	–	Off	The port is not connected or has been shut down.
	Green	Steady on	A link has been established on the port. NOTE: During device startup, all port indicators are steady green for about 2 seconds and then off, indicating that service initialization is complete.
	Green	Blinking	The port is sending or receiving data.

Power Supply System

The device is powered by the power adapter delivered with the device.

Heat Dissipation System

The device has no fans and uses natural heat dissipation.

S110-8T2ST Technical Specifications

Technical specifications of the S110-8T2ST

Item	Specification
Dimensions without packaging (H x W x D) [mm(in.)]	Basic dimensions (excluding the parts protruding from the body): 35 mm x 210.0 mm x 130.0 mm (1.38 in. x 8.27 in. x 5.12 in.) Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 36.5 mm x 210.0 mm x 131.7 mm (1.44 in. x 8.27 in. x 5.19 in.)
Dimensions with packaging (H x W x D) [mm(in.)]	90.0 mm x 285.0 mm x 180.0 mm (3.54 in. x 11.22 in. x 7.09 in.)
Chassis height [U]	0.8 U
Chassis material	PC+ABS
Weight without packaging [kg(lb)]	0.46 kg (1.01 lb)
Weight with packaging [kg(lb)]	0.70 kg (1.54 lb)
Typical power consumption [W]	8 W
Typical heat dissipation [BTU/hour]	27.30 BTU/hour
Maximum power consumption [W]	8.4 W
Maximum heat dissipation [BTU/hour]	28.66 BTU/hour
Static power consumption	2
MTBF [years]	86.16 years
MTTR [hours]	2 hours
Availability	> 0.99999
Noise at normal temperature (acoustic power) [dB(A)]	Noise-free (no fans), < 30
Noise at normal temperature (acoustic pressure) [dB(A)]	Noise-free (no fans), < 20
Number of card slots	0
Number of power slots	0
Number of fans modules	0
Switching capacity	To obtain data of this specification item, see the corresponding datasheet or contact the product sales personnel.
Packet forwarding rate	To obtain data of this specification item, see the corresponding datasheet or contact the product sales personnel.
Working mode	Standard mode Port isolation Flow control disabling
MAC address entry	2K
Redundant power supply	Not supported
Long-term operating temperature [°C(°F)]	0°C to 40°C (32°F to 104°F) at an altitude of 0-1800 m (0-5906 ft.)
Restriction on the operating temperature variation rate [°C(°F)]	When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).
Storage temperature [°C(°F)]	–40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH]	5% RH to 95% RH (non-condensing)
Long-term operating altitude [m(ft.)]	0–5000 m (0–16404 ft.)
Storage altitude [m(ft.)]	0-5000 m (0-16404 ft.)
Power supply mode	Power adapter
Rated input voltage [V]	Power adapter input: 100–240 V AC; 50/60 Hz Power adapter output: 12 V DC
Input voltage range [V]	Power adapter input: 90 V AC to 264 V AC; 47 Hz to 63 Hz
Maximum input current [A]	1 A
Memory	–
Flash memory	–
Console port	Not supported
Eth Management port	Not supported
USB	Not supported
RTC	Not supported
RPS input	Not supported
Service port surge protection [kV]	Common mode: ±4 kV
Power supply surge protection [kV]	±2 kV in differential mode, ±4 kV in common mode
Ingress protection level (dustproof/waterproof)	IP20
Types of fans	None
Heat dissipation mode	Natural heat dissipation
Airflow direction	–
PoE	Not supported
Certification	EMC certification Safety certification Manufacturing certification

Low in stock

huawei

Huawei Switch S110-16LP2SR (16*GE ports(124W PoE+), 2*GE SFP ports, AC power)

(0)

LE 11,400.00

Overview

Table 4-13 Basic information about the S110-16LP2SR

Item	Details
Description	S110-16LP2SR (1610/100/1000BASE-T ports, 2GE SFP ports, PoE+, AC power)
Part Number	98012197
Model	S110-16LP2SR

Components

Figure 4-6 S110-16LP2SR appearance

1	PWR indicator	2	Sixteen GE PoE+ electrical ports
3	Electrical port indicator	4	Two GE optical ports
5	Optical port indicator	6	Port mode switch button NOTE: Standard Mode: All ports are in the same VLAN, and the flow control function is enabled. Port Isolation: All downlink ports are isolated from each other and cannot communicate with each other. Downlink ports can communicate only with uplink ports. (The last two downlink electrical ports are not isolated.) Uplink ports are not isolated or aggregated. Uplink Aggregation: Two uplink optical ports are aggregated into a trunk interface. Eth-Trunk supports load balancing only based on source physical ports. Flow Control Disabling: All ports are in the same VLAN and flow control is disabled.
7	Port indicator status switch button NOTE: Port status: The port indicator indicates the data transmission status of the port. PoE status: The port indicator indicates the PoE status of the port.	8	Ground screw
9	AC socket NOTE: Use the power cable delivered with the device.	–	–

Ports

Table 4-14 Ports on the S110-16LP2SR

Port	Connector Type	Description	Available Components
GE PoE+ electrical port	RJ45	A GE PoE+ electrical port sends and receives service data at 10/100/1000 Mbit/s. The port supports the PoE function.	Ethernet cable
GE optical port	SFP	A GE optical port can send and receive data at 100/1000 Mbit/s.	FE SFP/eSFP optical modules (only optical modules with transmission distances less than or equal to 15 km are supported) GE eSFP optical modules (only optical modules with transmission distances less than or equal to 10 km are supported)

Port

Connector Type

Description

Available Components

GE PoE+ electrical port

RJ45

A GE PoE+ electrical port sends and receives service data at 10/100/1000 Mbit/s.

The port supports the PoE function.

Ethernet cable

GE optical port

SFP

A GE optical port can send and receive data at 100/1000 Mbit/s.

Indicators and Buttons

Table 4-15 Description of indicators on the device

Indicator	Color	Status	Description
PWR indicator	–	Off	The device is powered off.
PWR indicator	Green	Steady on	The power supply is normal.
Port indicator (Port status)	–	Off	The port is not connected or has been shut down.
	Green	Steady on	A link has been established on the port. NOTE: During device startup, all port indicators are steady green for about 2 seconds and then off, indicating that service initialization is complete.
	Green	Blinking	The port is sending or receiving data.
Port indicator (PoE status)	–	Off	The port is not supplying PoE power.
	Green	Steady on	The port is supplying power to the connected PD.
	Green	Blinking	The PoE power of the device is insufficient, and the port cannot provide power to the PD.

Low in stock

huawei

Huawei Switch S110-24T2SR (24*GE ports, 2*GE SFP ports, AC power)

(0)

LE 9,900.00

S110-24T2SR appearance

1	PWR indicator	2	Twenty-four GE electrical ports
3	Electrical port indicator	4	Two GE optical ports
5	Optical port indicator	6	Port mode switch button NOTE: Standard Mode: All ports are in the same VLAN, and the flow control function is enabled. Port Isolation: All downlink ports are isolated from each other and cannot communicate with each other. Downlink ports can communicate only with uplink ports. (The last two downlink electrical ports are not isolated.) Uplink ports are not isolated or aggregated. Uplink Aggregation: Two uplink optical ports are aggregated into a trunk interface. Eth-Trunk supports load balancing only based on source physical ports. Flow Control Disabling: All ports are in the same VLAN and flow control is disabled.
7	Ground screw	8	AC socket NOTE: Use the power cable delivered with the device.

Ports

Ports on the S110-24T2SR

Port	Connector Type	Description	Available Components
GE PoE+ electrical port	RJ45	A GE PoE+ electrical port sends and receives service data at 10/100/1000 Mbit/s.	Ethernet cable
GE optical port	SFP	A GE optical port can send and receive data at 100/1000 Mbit/s.	FE SFP/eSFP optical modules (only optical modules with transmission distances less than or equal to 15 km are supported) GE eSFP optical modules (only optical modules with transmission distances less than or equal to 10 km are supported)

Indicators and Buttons

Description of indicators on the device

Indicator	Color	Status	Description
PWR indicator	–	Off	The device is powered off.
PWR indicator	Green	Steady on	The power supply is normal.
Port indicator	–	Off	The port is not connected or has been shut down.
	Green	Steady on	A link has been established on the port. NOTE: During device startup, all port indicators are steady green for about 2 seconds and then off, indicating that service initialization is complete.
	Green	Blinking	The port is sending or receiving data.

Power Supply System

The device is powered by the power cable delivered with the device.

Heat Dissipation System

The device has no fans and uses natural heat dissipation.

Technical Specifications

Technical specifications of the S110-24T2SR

In stock

huawei

Huawei S110-24LP2SR eKitEngine Unmanaged PoE+ Switch, 24 Port Gigabit Ethernet + 2 SFP ports

(0)

LE 10,450.00

Overview

Table 4-21 Basic information about the S110-24LP2SR

Item	Details
Description	S110-24LP2SR (2410/100/1000BASE-T ports, 2GE SFP ports, PoE+, AC power)
Part Number	98012198
Model	S110-24LP2SR

Components

Figure 4-8 S110-24LP2SR appearance

1	PWR indicator	2	Twenty-four GE PoE+ electrical ports
3	Electrical port indicator	4	Two GE optical ports
5	Optical port indicator	6	Port mode switch button NOTE: Standard Mode: All ports are in the same VLAN, and the flow control function is enabled. Port Isolation: All downlink ports are isolated from each other and cannot communicate with each other. Downlink ports can communicate only with uplink ports. (The last two downlink electrical ports are not isolated.) Uplink ports are not isolated or aggregated. Uplink Aggregation: Two uplink optical ports are aggregated into a trunk interface. Eth-Trunk supports load balancing only based on source physical ports. Flow Control Disabling: All ports are in the same VLAN and flow control is disabled.
7	Port indicator status switch button NOTE: Port status: The port indicator indicates the data transmission status of the port. PoE status: The port indicator indicates the PoE status of the port.	8	Ground screw
9	AC socket NOTE: Use the power cable delivered with the device.	–	–

Ports

Table 4-22 Ports on the S110-24LP2SR

Port	Connector Type	Description	Available Components
GE PoE+ electrical port	RJ45	A GE PoE+ electrical port sends and receives service data at 10/100/1000 Mbit/s. The port supports the PoE function.	Ethernet cable
GE optical port	SFP	A GE optical port can send and receive data at 100/1000 Mbit/s.	FE SFP/eSFP optical modules (only optical modules with transmission distances less than or equal to 15 km are supported) GE eSFP optical modules (only optical modules with transmission distances less than or equal to 10 km are supported)

Port

Connector Type

Description

Available Components

GE PoE+ electrical port

RJ45

A GE PoE+ electrical port sends and receives service data at 10/100/1000 Mbit/s.

The port supports the PoE function.

Ethernet cable

GE optical port

SFP

A GE optical port can send and receive data at 100/1000 Mbit/s.

FE SFP/eSFP optical modules (only optical modules with transmission distances less than or equal to 15 km are supported)
GE eSFP optical modules (only optical modules with transmission distances less than or equal to 10 km are supported)

Indicators and Buttons

Table 4-23 Description of indicators on the device

Indicator	Color	Status	Description
PWR indicator	–	Off	The device is powered off.
PWR indicator	Green	Steady on	The power supply is normal.
Port indicator (Port status)	–	Off	The port is not connected or has been shut down.
	Green	Steady on	A link has been established on the port. NOTE: During device startup, all port indicators are steady green for about 2 seconds and then off, indicating that service initialization is complete.
	Green	Blinking	The port is sending or receiving data.
Port indicator (PoE status)	–	Off	The port is not supplying PoE power.
	Green	Steady on	The port is supplying power to the connected PD.
	Green	Blinking	The PoE power of the device is insufficient, and the port cannot provide power to the PD.

Power Supply System

The device uses the power adapter delivered with the device to supply power to the device and the connected PD. The power adapter can provide 124 W PoE power, which ensures full PoE power on 8 ports in compliance with 802.3af or on 4 ports in compliance with 802.3at.

Heat Dissipation System

The device has no fans and uses natural heat dissipation.

Low in stock

huawei

Huawei S220S-8T2J Layer 2 Switch, 8 Port Gigabit, 2 x 10GE SFP+ ports

(0)

LE 5,430.00

Table 4-3 Basic information about the S220S-8T2J

Item	Details
Description	S220S-8T2J (810/100/1000BASE-T ports, 22.5GE SFP ports, built-in AC power, Fanless)
Part Number	98012453
Model	S220S-8T2J
First supported version	V600R024C00

In stock

huawei

Huawei Switch S310-24P4S (24*GE ports, 4*GE SFP ports, PoE+, AC power)

(0)

LE 27,300.00

Table 4-81 Basic information about the S310-24P4S

Item	Details
Description	S310-24P4S (2410/100/1000BASE-T ports, 4GE SFP ports, PoE+, AC power)
Part Number	98012201
Model	S310-24P4S
First supported version	V600R022C10

In stock

Product Comparison

Collection description

Explore Related Collections

Collection description